|
Setup Settings
The SEIKOSHA OP-1200 printer does not have any Dip Switches. You can verify or change various printer settings by using the switches and LED display on the control panel. Please refer to the printer manual for details of how to set these printers up.
Operation Panel
To print current settings.Turn the Power Switch ON then take Printer OFFLINE by pressing the ONLINE key. Hold down the PRINT FONT/TEST key until the LCD displays "STATUS PRINT".
The Operation panel consists of eight keys four LED indicators and an LCD display.
To Change the Function & Menu
The various settings of functions are arranged in up to seven directories. Take the printer OFFLINE, press the function key and the display flashes with the directory name. To change directory press either the UP or DOWN keys to toggle through the six or seven directories. Once you have found your directory press the SET key to enter the directory. The LCD flashes with the name of the function and the current setting. To move to a different function use the UP or DOWN keys. To change the setting on the display press the SET key again, and the Function setting flashes, then use the UP or DOWN keys. Having changed the setting press the SET key to store in memory.
To exit the Set Up mode and save your settings, press the ONLINE key. To exit without saving press the CONTINUE/RESET key.
List of Set Up (Function & Menu) Items
Print Directory
| Function |
Function Description |
| PAPER / (Envelope) |
Selects the size of the paper in the printer.
|
| COPIES |
Selects the number of copies
|
| ORIENT |
Selects the Orientation (Portrait or Landscape)
|
| FORM |
Selects the number of lines printed on a page
|
| MANUAL FEED |
Selects the manual feed mode from the multiuse cassette tray
|
| EET |
Selects the EET mode. The dot size becomes smaller in the order of DARK, MEDIUM and LIGHT.
|
PCL Directory
| Function |
Function Description |
| FONT SOUCE |
Selects the default font source. I=Internal C=Cartridge S=Downloaded
|
| FONT NUMBER |
Selects the default font
|
| PITCH |
Select the Character pitch (only available if font selected is scaleable with fixed pitch) Incremental unit is 0.01 cpi
|
| PT.SIZE |
Selects the point size (only available if font is scaleable) Incremental unit is 0.25 point
|
| SYMBOL |
Selects symbol set of font
|
PDL Directory
Only available if Optional PDL SIMM is fitted
| Function |
Function Description |
| JAMRECOVER |
Selects the jam recovery mode. ON=the jammed page may be reprinted
|
| PRT PS ERROR |
Selects whether the printer prints the error of PDL interpreter or not.
|
Job Directory
| Function |
Function Description |
| PAGEPROTECT |
Selects the page protection mode.
|
| RESOLUTION |
Selects the resolution for printing
|
| EMULATION |
Selects the emulation
|
| TIME OUT |
Selects the time (in seconds) that the printer waits for the next data via the current interface, when th I/F is set to AUTO
|
CONFIG Directory functions and menus
| Function |
Description |
| MC TRAY |
Selects the use of the multiuse cassette tray
|
| LOCK |
Selects the paper trays and combination of the trays to be locked
|
| CLR WARN |
Selects how to clear a warning message displayed on the LCD
|
| AUTO CONT |
Selects the conditions for clearing errors.
|
| DENSITY |
Selects the print density
|
| TONER ERROR |
Selects whether the printer displays the warning message on the LCD or not when the toner becomes low
|
| P.SIZE ERR |
Selects whether the printer displays the message "PAPER SIZE ERROR" on the LCD or not when this error occurs
|
| THICK PAPER |
Selects the thick paper mode
|
| TONER SAVE |
Selects the amount of toner to be used
|
| SLEEP MODE |
Selects the Sleep Mode
|
| SLEEP TIMER |
Selects the time to enter the sleep mode
|
| I/F |
Selects the type of interface between the printer and host computer
|
| DATA BUFFER |
Selects the data buffer size
|
| OVER LOAD |
Selects the percentage of RAM to be used as overload buffer
|
| INDICATE |
Selects the language on the LCD
|
PARAL. directory functions and Menus
| Function |
Description |
| PARALLEL |
Selects the data transfer speed
|
| ADV FNCTNS |
Selects the direction of the parallel interface communication
|
SERIAL Directory functions and Menus
| Function |
Description |
| SERIAL |
Selects the type of serial interface
|
| PROT |
Selects the protocol
|
| BAUD RATE |
Selects the data transfer rate
|
| DATA BIT |
Selects the number of data bits
|
| PARITY |
Selects the Parity Bit
|
| STOP BIT |
|
|