| NSW Series | 
|
BATM’s new low-cost Fast Ethernet switch, the 8-port Titan T2, enables network users to interconnect high and low speed network segments, integrate network capabilities, and preserve investments in existing Ethernet equipment.
This switch is designed to solve bandwidth problems caused by increasing network load in today's SOHO networking environments. The auto-negotiating of 10Mbps or 100Mbps data rate on each port and fully Plug-and-Play design make the Titan T2 a truly easy-to-use switching hub.
The Titan T2 offers a non-blocking throughput of 200Mbps (at full-duplex mode) per port, and two flow control methods. This store-and-forward switching mode promises low latency and eliminates data fragment. It’s advanced features and very compact size make the TITAN T2 the ideal choice for SOHO environments, eliminating network bottlenecks and increasing network performance and productivity.
|
Non-blocking architecture |
|
|
8 auto negotiating 10/100Mbps RJ45 ports |
|
|
Auto senses speed and full/half-duplex operation |
|
|
Uplink port for cascading 2 or more units |
|
|
Automatic source address learning |
|
|
Built in storage of 1K MAC addresses |
|
|
Fully Plug and Play |
|
|
Low power consumption (3.3V) |
The Titan T2 10/100BaseT/TX Fast Ethernet switch series is designed to alleviate increasing network congestion caused by the use of high-speed applications. This switch has 16 10/100 Fast Ethernet ports, and is the ideal solution for workgroup environments that require high-bandwidth as well as integrated connectivity to backbones.
The Titan T2 switches offer highly advanced features, such as flow control for full duplex operation. It is effectively designed with a low-cost architecture, TITAN T2 switches have broken through industry price barriers. With high port density and low cost-per-port, enterprise network managers can enjoy fast LAN speed and immediate migration to higher-performance networks, while preserving legacy LAN investments.
With the addition of the 100BaseFX slide in module the TitanT2 can be placed at a distance of up to 2 Km from the network core. The 100BaseFX slide in module comes with SC or ST interface.
|
|
Non-blocking data transmission |
|
|
Uplink port for cascading capability |
|
|
All ports support full-duplex and half-duplex operation |
|
|
All ports support 10/100Mbps auto-negotiation |
|
|
Store and forward switching mode to safeguard against possible packet loss |
|
|
Automatic source address learning |
|
|
Suitable for 19" rack mount or standalone installation |
|
|
Supports flow control for full duplex operation to eliminate packet loss |
|
|
DIP switch for manual selection of FDx/HDx on fiber slide-in module |
|
|
Built in storage of 1K MAC addresses |
|
|
Support 802.3x flow-control |
|
|
| Part Number | Description |
| NSW-7308 | 8-port 10/100BaseTX Fast Ethernet unmanaged switch |
| NSW-7116 | 16-port 10/100BaseTX Fast Ethernet unmanaged switch |
| NSW-SC | 1 port 100BaseFX slide in module with SC connector |
| NSW-ST | 1 port 100BaseFX slide in module with ST connector |